V32 Racing Forum

aastes · aastes

These polls are for replacement/additional classes as sellected by you. As said before ONLY those that got seconded(listed) more than once will be polled. Classes with the highest percentage of yes will get the nod over those classes that finish with a closer result. naturally those classes that h...

gref · gref

My proposal is to merge th 997 class into GT and have an NSR class. Class spec would be along the lines of: factory standard cars only - no mods example, angle winder king vs inline shark. Not sure how they compare as we need to get down to MR again - I have an angle and Nathan has inline either stock tyres as fi...

knoath · knoath

So the Rules and Regs have been finalised. Can we sign off on a list of available Makes and Models allowed for each class? I can't find it if it's already been done. Dick

V32Glenn · V32Glenn

Well had a quick look at some runners for the weekend, my Gt40 looks ready to strip another gear, I think either the chassis flexes too much or the motor holder allow to much rocking. So I'm in the market for something else, the list show other manufactures than Fly (haven't been inpressed with them) wa...

aastes · aastes

Ninco type cars eg, Jags etc. to be run with limited motor performance. For those of you wondering how these cars perform just remember you dont need super fast cars to have close racing. Most Ninco now come with a 16k motor. This would have to be the upper limit in terms of performance. Wheels to be stoc...

aastes · aastes

Plenty of models out there, SCX, Scalextric etc. Cars would be quite diffrent to V8s as most would be based round small sedans which actually goes to make good racing especially SCX versions -- Edited by aastes at 16:04, 2008-10-29 -- Edited by aastes at 16:05, 2008-10-29

mtpanorama · mtpanorama

If we use the bodies from Phil in Tassie the info that comes with them suggests that to get the front wheels into the right place the front axle holders need to be cut out and reglued on the other side to move the axle forward on the Mustang or Camaro chassis. Do we need to make this an allowable mod or so long a...

Rob · Rob

Guys we need to put together a list of cars for nomination for the LMP class, Ive quickly listed some of the cars I think are available could you please add or subtract anything not eligable for this class. Also if your able to provide info on motors and gearign it would be appreciated. FlyJoest Porche ??...

aastes · aastes

The following classes were successful Classic 50s 60s GT type sports cars 92% WTCC type cars 68% NASCARS (SCX) 69% LMP 92% DTM just failed to make it - the others were nowhere near getting up

aastes · aastes

I know this is an abuse of power but I really think an open wheeler class is needed and SCX are cheap, tuff, and go Ok once you have thrown away the rubbish rear tyres. They do not shatter like Scalextric and dont need much to sort out I have put this class in on the sloe understanding it will never be run with m...

aastes · aastes

SCX NASCARS would be the class. Plenty to chose from. Scalextric would be too clase to V8s -- Edited by aastes at 16:03, 2008-10-29

aastes · aastes

HOT RODs is a whole new game. MJK dont make tyres for these but I do and they perform quite good. Crap on standard tyres

aastes · aastes

Another two make class in the real world but there are plenty of models available

aastes · aastes

Would need some work on what cars are eligible because there is a performnce variance between makers

aastes · aastes

We have already basically agreed to this class but I have to go via the book When voting also think about what mods you would like and how to sort through what makes are allowed to run

aastes · aastes

I cant help you with this class cos to me its no diffrent to NINCO GT - perhaps I am a Luddite.

gref · gref

When will the new polls commence Steve?

aastes · aastes

Please nominate a class - if it gets seconded it will go into the next poll

aastes · aastes

Questions about what cars and classes will be raced I think it may be best to break the car class pols/questions up into class type and just poll one at a time ie poll for prefered Sedans and have a choice of say V8s, Rally, Muscle car etc. Do the same for open wheelers, Sports and GT type cars Whether the po...

aastes · aastes

Allow Slot It/Alloy wheels/gears (with correct hub inserts only) -- Edited by aastes at 10:01, 2008-10-25

aastes · aastes

Allowing other brand will turn this class into a full GT class rather than just a NINCO GT class -- Edited by aastes at 10:02, 2008-10-25

aastes · aastes

Allow things like modern Ford Mustangs and Vipers to run with the classic Muslce cars -- Edited by aastes at 10:03, 2008-10-25 -- Edited by aastes at 10:04, 2008-10-25

aastes · aastes

Allow Slot It/Alloy wheels/gears -- Edited by aastes at 10:04, 2008-10-25

aastes · aastes

No one wanted to change to allow MJKs so evryone must be happy to run standard tyres. However the question was raised about lifting the maximum weight currently set at 95gms -- Edited by aastes at 10:05, 2008-10-25

aastes · aastes

Allow alloy wheels and gears -- Edited by aastes at 10:05, 2008-10-25

aastes · aastes

This would let cars like Escorts etc run in the class -- Edited by aastes at 10:06, 2008-10-25

aastes · aastes

Allow Slot It/Alloy wheels/gears -- Edited by aastes at 18:46, 2008-10-20 -- Edited by aastes at 10:07, 2008-10-25

aastes · aastes

Allow alloy wheels and gears with correct hub inserts only -- Edited by aastes at 10:07, 2008-10-25

Topic		Started By	Replies	Views	Last Post
	STICKY: YES/NO Polls REPLACEMENT to be raced in 2008 - Poll 3 (Preview) These polls are for replacement/additional classes as sellected by you. As said before ONLY those that got seconded(listed) more than once will be polled. Classes with the highest percentage of yes will get the nod over those classes that finish with a closer result. naturally those classes that h...	aastes	1	385	Oct 20, 2008 by aastes
	class proposal for 2010 (Preview) My proposal is to merge th 997 class into GT and have an NSR class. Class spec would be along the lines of: factory standard cars only - no mods example, angle winder king vs inline shark. Not sure how they compare as we need to get down to MR again - I have an angle and Nathan has inline either stock tyres as fi...	gref	22	742	Jul 22, 2009 by mtpanorama
	Complete list of cars 2009 (Preview) So the Rules and Regs have been finalised. Can we sign off on a list of available Makes and Models allowed for each class? I can't find it if it's already been done. Dick	knoath	41	971	Jun 20, 2009 by nomad
	60-70's Le mans (Preview) Well had a quick look at some runners for the weekend, my Gt40 looks ready to strip another gear, I think either the chassis flexes too much or the motor holder allow to much rocking. So I'm in the market for something else, the list show other manufactures than Fly (haven't been inpressed with them) wa...	V32Glenn	7	306	Jan 29, 2009 by mtpanorama
	Classic 50s 60s GT type sports cars (Preview) Ninco type cars eg, Jags etc. to be run with limited motor performance. For those of you wondering how these cars perform just remember you dont need super fast cars to have close racing. Most Ninco now come with a 16k motor. This would have to be the upper limit in terms of performance. Wheels to be stoc...	aastes	32	740	Dec 24, 2008 by Rob
	WTCC type cars (Preview) Plenty of models out there, SCX, Scalextric etc. Cars would be quite diffrent to V8s as most would be based round small sedans which actually goes to make good racing especially SCX versions -- Edited by aastes at 16:04, 2008-10-29 -- Edited by aastes at 16:05, 2008-10-29	aastes	11	314	Dec 4, 2008 by Scrivo
	Muscle Cars (Preview) If we use the bodies from Phil in Tassie the info that comes with them suggests that to get the front wheels into the right place the front axle holders need to be cut out and reglued on the other side to move the axle forward on the Mustang or Camaro chassis. Do we need to make this an allowable mod or so long a...	mtpanorama	14	608	Nov 29, 2008 by nomad
	LMP Nominations for 2009 (Preview) Guys we need to put together a list of cars for nomination for the LMP class, Ive quickly listed some of the cars I think are available could you please add or subtract anything not eligable for this class. Also if your able to provide info on motors and gearign it would be appreciated. FlyJoest Porche ??...	Rob	16	388	Nov 10, 2008 by Shane Lott
	New classes for 2009 - winners (Preview) The following classes were successful Classic 50s 60s GT type sports cars 92% WTCC type cars 68% NASCARS (SCX) 69% LMP 92% DTM just failed to make it - the others were nowhere near getting up	aastes	7	307	Nov 2, 2008 by mtpanorama
	SCX F1 (Preview) I know this is an abuse of power but I really think an open wheeler class is needed and SCX are cheap, tuff, and go Ok once you have thrown away the rubbish rear tyres. They do not shatter like Scalextric and dont need much to sort out I have put this class in on the sloe understanding it will never be run with m...	aastes	5	253	Nov 1, 2008 by NimROD
	NASCARS (SCX) (Preview) SCX NASCARS would be the class. Plenty to chose from. Scalextric would be too clase to V8s -- Edited by aastes at 16:03, 2008-10-29	aastes	4	222	Oct 30, 2008 by mtpanorama
	HOT RODS (Preview) HOT RODs is a whole new game. MJK dont make tyres for these but I do and they perform quite good. Crap on standard tyres	aastes	3	198	Oct 30, 2008 by knoath
	DTM (Preview) Another two make class in the real world but there are plenty of models available	aastes	3	194	Oct 30, 2008 by knoath
	Rally cars (Preview) Would need some work on what cars are eligible because there is a performnce variance between makers	aastes	4	181	Oct 30, 2008 by knoath
	LMP (Preview) We have already basically agreed to this class but I have to go via the book When voting also think about what mods you would like and how to sort through what makes are allowed to run	aastes	5	205	Oct 30, 2008 by Rob
	GT1 (Preview) I cant help you with this class cos to me its no diffrent to NINCO GT - perhaps I am a Luddite.	aastes	2	199	Oct 29, 2008 by gref
	new polls? (Preview) When will the new polls commence Steve?	gref	0	171	Oct 28, 2008 by gref
	Nominations for replacement classes please (Preview) Please nominate a class - if it gets seconded it will go into the next poll	aastes	31	535	Oct 26, 2008 by Chewycat
	Racing Classes (Preview) Questions about what cars and classes will be raced I think it may be best to break the car class pols/questions up into class type and just poll one at a time ie poll for prefered Sedans and have a choice of say V8s, Rally, Muscle car etc. Do the same for open wheelers, Sports and GT type cars Whether the po...	aastes	37	938	Oct 25, 2008 by mtpanorama
	Classic le Mans - Ally wheels and gears (Preview) Allow Slot It/Alloy wheels/gears (with correct hub inserts only) -- Edited by aastes at 10:01, 2008-10-25	aastes	8	300	Oct 23, 2008 by mtpanorama
	NINCO GT - Allow other brands (Preview) Allowing other brand will turn this class into a full GT class rather than just a NINCO GT class -- Edited by aastes at 10:02, 2008-10-25	aastes	9	291	Oct 23, 2008 by mtpanorama
	Muscle cars - Allow modern Muscle cars (Preview) Allow things like modern Ford Mustangs and Vipers to run with the classic Muslce cars -- Edited by aastes at 10:03, 2008-10-25 -- Edited by aastes at 10:04, 2008-10-25	aastes	12	332	Oct 23, 2008 by aastes
	NINCO GTs Wheels and gears (Preview) Allow Slot It/Alloy wheels/gears -- Edited by aastes at 10:04, 2008-10-25	aastes	12	345	Oct 22, 2008 by gref
	Porsche 997 - weight question (Preview) No one wanted to change to allow MJKs so evryone must be happy to run standard tyres. However the question was raised about lifting the maximum weight currently set at 95gms -- Edited by aastes at 10:05, 2008-10-25	aastes	7	432	Oct 22, 2008 by mtpanorama
	Group 5 - Allow Alloy wheels and gears (Preview) Allow alloy wheels and gears -- Edited by aastes at 10:05, 2008-10-25	aastes	7	247	Oct 21, 2008 by knoath
	Muscle Cars - Allow all pre 1972(ish) type Sedans to run in the class (Preview) This would let cars like Escorts etc run in the class -- Edited by aastes at 10:06, 2008-10-25	aastes	6	235	Oct 21, 2008 by knoath
	Aussie V8s - wheels and gears (Preview) Allow Slot It/Alloy wheels/gears -- Edited by aastes at 18:46, 2008-10-20 -- Edited by aastes at 10:07, 2008-10-25	aastes	7	303	Oct 20, 2008 by V32Glenn
	Muscle cars - Alloy wheels and gears (Preview) Allow alloy wheels and gears with correct hub inserts only -- Edited by aastes at 10:07, 2008-10-25	aastes	4	221	Oct 20, 2008 by gref
Page 1 of 1 sorted by