V32 Racing Forum

aastes · aastes

-- Edited by aastes at 13:09, 2008-12-01 -- Edited by aastes at 13:11, 2008-12-01

Rob · Rob

Updated V32 2009 Rules. Edited items in RED. V32 2009 Rules 9 Aug 2009.pdf

aastes · aastes

Any brand Box stock cars with Class specific mods listed below. (18k motor limit)Ninco spring guide (Not Pro-Race Guides) - spring can be removedChassis Trimming/shaving to a maximum of 1mm along each sideWheel/Tyre combination and gears may be replaced with other hub patterns or Alloys/gears b...

Scrivo · Scrivo

I have been thinking about last Saturday nights racing, and want to put foward some new rules for next year or maybe added to this year.. 1, Your cars to be entered prior to racing for all classes. 2, The car that you entered is the car that you run, if it breaks or isnt going as good as others it cant be chang...

gref · gref

I seem to recall that everyone wanted to include motor bracing in the 997 class? If this is so I want/need confirmation before I put one in my car

nomad · nomad

Boys, hate to inform you all, but the mosler comes with standard guide only. Perhaps themaker intended that way to slow them down.

nomad · nomad

I note that in particular the GT class has an upper limit of 20,000 rpm for the ninco motors and other brands of motor limited to 19k. (or no better than standard 18k, which is fine). I see slot it have produced a 19.5 k rpm motor which would allow other cars in the GT class a bit more of a leg up. ie: all mab...

aastes · aastes

Jap GT & Super GTRear axle/motor support modWheel/Tyre combination may be replaced with other hub patterns or Alloys but the overall width and diameter must remain as standard for that particular modelChassis Trimming/shaving to a maximum of 1mm along each side Ninco can only run NC5 motors o...

aastes · aastes

Any brand Box stock cars with Class specific mods listed below. (Excluding Slotter, Slot-it & Racer cars) (18k motor limit)Ninco spring guide (Not Pro-Race Guides) - may have spring removedWheel/Tyre combination may be replaced with other hubs from within the class or Alloy wheels with corr...

aastes · aastes

Home of V32 rules and regs - suggest we start to get a feel for what rules and regs we want fixed - also see car class for suggestions as to how to narrow the classes to be used. There appears to be only three areas which need reviews for the coming season Wheels Gears Scrutineering Note: The use of MJKs in Por...

aastes · aastes

Chassis Trimming/shaving to a maximum of 1mm along each sideNC5 motors onlyMust run standard hub and gears and tyres -- Edited by aastes at 15:27, 2008-10-29 -- Edited by aastes at 19:07, 2008-10-29

aastes · aastes

Please note each class may have specific regs applied ONLY to THEM. The regs listed below are an overall view RULE #1 - HAVE FUNScrutineering All cars to be raced will be inspected prior to racing.Top three cars may be opened after racing.The Scrutineers/Committee's ruling is finalMotor may be sec...

aastes · aastes

Any brand Box stock cars from the period up to mid 70s as shown on list to be provided with Class specific mods listed below. (18k motor limit)Plastic wheel/Tyre combination may be replaced with other hubs from within the class Replacement spur gear of same dimensions/teeth number as per originalCh...

aastes · aastes

Slot-It brand Box Stock cars with standard motor either 25k or 21.5k as factory fitted in modelIn-line motor configuration OnlyChassis Trimming/shaving to a maximum of 1mm along each sideMust run standard hubs and gears -- Edited by aastes at 15:01, 2008-10-29 -- Edited by aastes at 15:04, 2008-...

aastes · aastes

These are the V8 specific regs young Rob came up with and they look good to me. The question of hubs is a curly one here so I like the solution - Body Modifications to aid lowering allowed including shaving of posts and sanding of wheel arches allowed.Chassis No modifications allowed to the fundimenta...

mtpanorama · mtpanorama

After following the lowering of the Skaife V8 on AUSLOT it looks as if there is more than one way to skin a cat. Instead of cutting the body posts, which I am against, The chassis is trimmed a bit and the axles in the chassis have been raised which could result in no damage to the body, only to the chassis whi...

aastes · aastes

Breaking a plastic wheel means buying a whole set of wheels which there is always the possibilty that they are out or round Pick which best suits -- Edited by aastes at 14:26, 2008-09-23

aastes · aastes

Sorry for redoing this poll but I missed one option off which may suit some a bit better

aastes · aastes

Pick which best suits

Topic		Started By	Replies	Views	Last Post
	STICKY: Complete set of regs - Updated PDF (Preview) -- Edited by aastes at 13:09, 2008-12-01 -- Edited by aastes at 13:11, 2008-12-01	aastes	47	1061	Mar 7, 2009 by gref
	Updated V32 Rules 9th Aug 2009 (Preview) Updated V32 2009 Rules. Edited items in RED. V32 2009 Rules 9 Aug 2009.pdf	Rob	16	696	Oct 15, 2009 by gref
	Proposed regs and rules GROUP 5 (Preview) Any brand Box stock cars with Class specific mods listed below. (18k motor limit)Ninco spring guide (Not Pro-Race Guides) - spring can be removedChassis Trimming/shaving to a maximum of 1mm along each sideWheel/Tyre combination and gears may be replaced with other hub patterns or Alloys/gears b...	aastes	26	604	Aug 9, 2009 by gref
	Car breakdown (Preview) I have been thinking about last Saturday nights racing, and want to put foward some new rules for next year or maybe added to this year.. 1, Your cars to be entered prior to racing for all classes. 2, The car that you entered is the car that you run, if it breaks or isnt going as good as others it cant be chang...	Scrivo	17	755	Jul 17, 2009 by knoath
	997 motor brace? (Preview) I seem to recall that everyone wanted to include motor bracing in the 997 class? If this is so I want/need confirmation before I put one in my car	gref	7	324	Mar 26, 2009 by Rob
	mosler standard guide (Preview) Boys, hate to inform you all, but the mosler comes with standard guide only. Perhaps themaker intended that way to slow them down.	nomad	11	479	Mar 18, 2009 by knoath
	exchange of motors? (Preview) I note that in particular the GT class has an upper limit of 20,000 rpm for the ninco motors and other brands of motor limited to 19k. (or no better than standard 18k, which is fine). I see slot it have produced a 19.5 k rpm motor which would allow other cars in the GT class a bit more of a leg up. ie: all mab...	nomad	1	252	Jan 23, 2009 by mtpanorama
	Proposed regs and rules - GT (old NINCO GT class) (Preview) Jap GT & Super GTRear axle/motor support modWheel/Tyre combination may be replaced with other hub patterns or Alloys but the overall width and diameter must remain as standard for that particular modelChassis Trimming/shaving to a maximum of 1mm along each side Ninco can only run NC5 motors o...	aastes	29	740	Nov 21, 2008 by Shane Lott
	Proposed - 60s/70s Le Mans (Preview) Any brand Box stock cars with Class specific mods listed below. (Excluding Slotter, Slot-it & Racer cars) (18k motor limit)Ninco spring guide (Not Pro-Race Guides) - may have spring removedWheel/Tyre combination may be replaced with other hubs from within the class or Alloy wheels with corr...	aastes	15	321	Nov 10, 2008 by mtpanorama
	Rules and regs for racing (Preview) Home of V32 rules and regs - suggest we start to get a feel for what rules and regs we want fixed - also see car class for suggestions as to how to narrow the classes to be used. There appears to be only three areas which need reviews for the coming season Wheels Gears Scrutineering Note: The use of MJKs in Por...	aastes	9	362	Nov 2, 2008 by aastes
	Proposed regs and rules - Porsche 997 (Preview) Chassis Trimming/shaving to a maximum of 1mm along each sideNC5 motors onlyMust run standard hub and gears and tyres -- Edited by aastes at 15:27, 2008-10-29 -- Edited by aastes at 19:07, 2008-10-29	aastes	4	188	Oct 29, 2008 by aastes
	Generic Rules and Regs for all classes (Preview) Please note each class may have specific regs applied ONLY to THEM. The regs listed below are an overall view RULE #1 - HAVE FUNScrutineering All cars to be raced will be inspected prior to racing.Top three cars may be opened after racing.The Scrutineers/Committee's ruling is finalMotor may be sec...	aastes	6	260	Oct 29, 2008 by aastes
	proposed Muscle cars Regs and rules (Preview) Any brand Box stock cars from the period up to mid 70s as shown on list to be provided with Class specific mods listed below. (18k motor limit)Plastic wheel/Tyre combination may be replaced with other hubs from within the class Replacement spur gear of same dimensions/teeth number as per originalCh...	aastes	10	194	Oct 29, 2008 by aastes
	Proposed - Slot It Regs (Preview) Slot-It brand Box Stock cars with standard motor either 25k or 21.5k as factory fitted in modelIn-line motor configuration OnlyChassis Trimming/shaving to a maximum of 1mm along each sideMust run standard hubs and gears -- Edited by aastes at 15:01, 2008-10-29 -- Edited by aastes at 15:04, 2008-...	aastes	8	190	Oct 29, 2008 by aastes
	Proposed V8 regs - draft (Preview) These are the V8 specific regs young Rob came up with and they look good to me. The question of hubs is a curly one here so I like the solution - Body Modifications to aid lowering allowed including shaving of posts and sanding of wheel arches allowed.Chassis No modifications allowed to the fundimenta...	aastes	10	218	Oct 29, 2008 by aastes
	Lowering V8's (Preview) After following the lowering of the Skaife V8 on AUSLOT it looks as if there is more than one way to skin a cat. Instead of cutting the body posts, which I am against, The chassis is trimmed a bit and the axles in the chassis have been raised which could result in no damage to the body, only to the chassis whi...	mtpanorama	10	291	Oct 29, 2008 by Rob
	Wheels and tyres (Preview) Breaking a plastic wheel means buying a whole set of wheels which there is always the possibilty that they are out or round Pick which best suits -- Edited by aastes at 14:26, 2008-09-23	aastes	6	268	Oct 29, 2008 by knoath
	Scruteneering (Preview) Sorry for redoing this poll but I missed one option off which may suit some a bit better	aastes	7	320	Oct 23, 2008 by knoath
	Gears (Preview) Pick which best suits	aastes	8	267	Sep 24, 2008 by aastes
Page 1 of 1 sorted by